REGO Twin stage regulator 450MJ/h dual bottle (T) and pigtails 1/2″ out

Add to Wishlist
Compare

REGO Twin stage regulator 450MJ/h dual bottle (T) and long pigtails, 1/2″ out

$254.19 ex. GST

Add to Wishlist
Compare

REGO™ Twin Stage Regulator kit 450MJ/h 1/2″ outlet, dual bottle supply (T piece) w/ 2x copper pigtail

Description:

Kit comes with:

  • REGO™ twin stage regulator, guaranteed 450MJ/h @ 2.75kPa  [LV404B4]
  • T-piece adapter [1450E]
  • 20″ (500mm) annealed copper pigtails x2 [912FS20]
  • Mounting bracket [2403-UB]
  • Regulator to bracket bolts x2
Application:

This regulator is great for medium sized house LPG installations requiring two cylinder simultaneous usage, (<450MJ/h) it comes with all the bits to mount the regulator and connect two cylinders (bracket mounting screws 3403SCW sold separately). It includes two 20″ (500mm) copper pigtails for permanent installation of two (9/45kg) cylinders, and has a 1/2″ NPT female outlet, adapters to pipework sold separately.

Special Features:

This regulator has been tested for Australian conditions and has been rated to deliver a guaranteed 450MJ/h at 2.75kpa (11″ WC).

  • Includes an adapter for two cylinders simultaneous usage,  1/4″ male NPT by 2x 1/4″ female inverted Flare.
  • Large vent helps prevent blockage.
  • 1st stage vent outlet is tapped ⅛” female NPT for vent piping.
  • Second stage vent outlet is tapped to ⅜”female NPT for vent piping.
  • With 15 PSIG inlet pressure, the regulator is designed to not pass more than 2 PSIG downstream with the seat disc removed (complies with over pressure protection requirements).
  • Incorporates an integral relief valve on second stage.
  • Unique bonnet vent profile minimises freezing over of vents when properly installed.
  • Compact design saves space allowing for easy installation – especially under container hoods with collars.
  • Pre-tapped & plugged test point outlets 1/8” female NPT on both 1st stage and second stage outlet.
  • Plugs can be removed with a 3/16” hex (Allen) wrench.
  • Select brown finish.
Notes:

Images are representative of the type of regulator and are not necessarily the actual kit described.

The main picture shows a twin bottle kit (250MJ/h) whilst the second photo shows a representation of the actual regulator and bracket included.

SKU: LV404B4T Category:
Weight 2.2 kg
Dimensions 23 × 13 × 13 cm
Maximum Flow Rate

450 MJ/h
Outlet Thread

1/2" NPT
Inlet Type

Twin Bottle

Brand

RegO Products

Gameco stocks a complete range of RegO LP Gas and Anhydrous Ammonia Equipment. Our four fully stocked warehouses enable quick supply to all areas of Australia and New Zealand, and with direct factory support, there is nobody better placed to assist with you with all your RegO needs. Click Here for the full RegO Catalogue. Please don’t hesitate to contact us for assistance. Find here the following RegO product information: A) Rego Regulators and Accessories B) Rego Cylinder and Service Valves C) Rego Multivalve® Assemblies D) Rego Pressure Relief Valves and Relief Valve Manifolds E) Rego Globe and Angle Valves F) Rego Excess Flow, Check, Filler and Vapor Equalizing Valves G) Rego Internal Valves and Accessories H) Rego Adapters, Connectors and Fittings J) Rego Miscellaneous Equipment (Including Rotogages and ESVs) Please don’t hesitate to contact us for assistance.

Product Enquiry

Related products

Select at least 2 products
to compare